Corrugated Plastic / Twin-Wall Polypropylene Sheets

PP Corrugated Sheets for Printing, Packaging & Protection

Custom thickness, sheet weight, size and color for bulk orders. Share your application and quantity to discuss a suitable specification and request a quote.

Already have a specification? Send it with your inquiry. Not sure what you need? Start with your application.

Custom Specifications
Bulk Supply
Application-Based Selection
Close-up of PP Corrugated Sheet showing twin-wall hollow flute structure, edge cut, and flat surface
Twin-Wall Hollow Structure
Application example: UV printed signage and die-cut packaging dividers
Application Example

Flatbed Printing & Die-Cut Dividers

Engineered for consistent sheet flatness, corona treatment, and clean converting.

Why Specification Alignment Matters

Choose the Sheet Around Your Application

Comparing quotes by thickness alone often leads to under-performing sheets or unnecessary material cost. We help you align key parameters with how the sheet will actually be used.

Thickness & Sheet Weight

Confirm thickness (mm) and weight (g/m²) together

A 4mm sheet can be extruded at different gram weights depending on load requirements. Evaluating both parameters together lets you balance rigidity, unit weight, and bulk cost--preventing mismatched supplier quotes.

What We Help Confirm

Target thickness in mm + matching g/m² range based on your stacking, mounting, or handling needs.

Size & Flute Direction

Matched to your converting, printing, or assembly process

Flute (rib) orientation directly impacts bending lines, vertical compression strength in boxes, and stake insertion for yard signs. Custom sheet dimensions also help reduce trim waste on your press or die-cutter.

What We Help Confirm

Width × Length dimensions, flute direction (along length or width), and dimensional tolerances.

Material & Special Requirements

Build your quote on clear resin & functional criteria

Whether your project calls for 100% virgin polypropylene for clean printing and consistent flexing, or a tailored virgin/recycled blend for cost-sensitive protection, specifying additives upfront ensures accurate pricing.

What We Help Confirm

Virgin vs. recycled PP ratio, double-sided corona treatment, UV stabilization, ESD, or flame-retardant grades.

Application-First Selection

What Will You Use the Sheets For?

Select your primary application below to pre-fill the quote form with relevant considerations. You can modify your selection at any time.

Have an existing sample or specification? Include it in your inquiry.

Upload Spec / Drawing Below →
Initial Screening Parameters

Specify Your Sheet -- or Let Us Help

Review our standard production range below. If you are unsure about the exact pairing of thickness and sheet weight (g/m²), tell us your use case and we will propose a specification.

01 / Thickness Custom Extruded

2 mm - 18.5 mm

Commonly 3mm-5mm for sign printing and standard boxes; 6mm-10mm+ for heavy-duty returnable dividers and layer pads.

02 / Sheet Weight (g/m²) Confirm w/ Thickness

300 g/m² - 4500 g/m²

Measured in grams per square meter (g/m²). Must be confirmed alongside thickness to achieve your target stiffness and unit cost.

03 / Sheet Size Cut-to-Size

Max Width up to 2500 mm

Standard export sizes (e.g., 1220×2440mm / 4×8ft, 1000×2000mm) or custom cut lengths to fit your press, pallet, or container.

04 / Color Options Subject to Confirmation

Standard & Custom Colors

Clear

White, black, translucent, and standard colors. Custom Pantone/RAL matching requires sample or color code confirmation.

05 / Flute Direction Schematic Diagram
Longitudinal Parallel to Length
Cross-Direction Parallel to Width

Diagram for illustration only. Specify flute direction for H-stake sign mounting or box compression strength.

06 / Surface & Functional Grades Verify per Spec

Printing & Performance Options

  • Surface Treatment: 1-side or 2-side Corona Treatment for ink adhesion.
  • Special Requirements: UV stabilization, Anti-static / ESD, Flame Retardant, or Food-Contact grades are evaluated per specific order specification.
+ View Extended Technical Reference (Thickness vs. Weight Pairing & Tolerance Notes)

Note: The pairings below are typical industry reference ranges. Final producible weight range, dimensional tolerances, and surface dyne levels are confirmed per order specification.

Thickness (mm) Typical Sheet Weight (g/m²) Common Applications Verification Notes
2.0 - 3.0 mm 350 - 550 g/m² [TO BE CONFIRMED] Floor/wall protection, light layer pads, appliance backing Virgin or recycled blend available
4.0 - 5.0 mm 650 - 1050 g/m² [TO BE CONFIRMED] Outdoor/indoor signage, die-cut tote boxes, partitions Corona treatment & flatness verified for printing
6.0 - 8.0 mm 1200 - 1800 g/m² [TO BE CONFIRMED] Heavy-duty returnable boxes, bottle/can pallet tier sheets Edge sealing / rounded corners optional [TO BE CONFIRMED]
9.0 - 12.0 mm 1900 - 2500 g/m² [TO BE CONFIRMED] High-load industrial dunnage, structural partitions Lead time & MOQ subject to custom extrusion setup
Verifiable Production & Inspection

Check the Details Behind Your Order

Rather than generic claims, we verify key specifications during extrusion, converting, and packing. Review how we check parameters across four core stages.

Digital caliper measuring thickness of PP corrugated sheet

Thickness & Wall Check

Digital caliper inspection across sheet width.

Electronic scale verifying gram weight per square meter of PP hollow sheet

Sheet Weight (g/m²) & Size

Sample weighing & diagonal squareness check.

In-House Inspection Record

Physical Parameter Verification

Application Wholesale Sign & Packaging Stock (Anonymous Buyer)
Required Spec 5.0 mm Thickness | 1000 g/m² | 1220 × 2440 mm
What Was Checked Multi-point caliper thickness, cut sample gram weight on calibrated scale, length/width & diagonal tolerances.
Confirmed Result Measurements recorded within agreed order tolerance range prior to palletizing [TO BE CONFIRMED].

* Note: Third-party test reports (e.g., RoHS, REACH, or specific mechanical tests) apply strictly to the tested material grade, specification, and test date--never generalized across all products.

Step-by-Step Risk Control

From Your Requirement to a Confirmed Order

Custom plastic sheet procurement works best when specifications, testing methods, and packing details are confirmed step by step before mass production.

01

Share Your Application

Provide your intended use case, known specifications (or request a recommendation), estimated quantity, and destination region.

02

Review the Proposed Specification

We align on thickness, sheet weight (g/m²), dimensions, material blend, packing method, and transparent quotation terms.

03

Discuss Sample Testing

For projects requiring ink adhesion checks, die-cutting trials, or load testing, we discuss a suitable sample arrangement.

04

Confirm Production & Shipping Details

Finalize the specification sheet, order terms, production schedule, palletizing layout, and export shipping instructions.

Need to Verify Printing, Converting, or Material Stiffness First?

Tell us what you need to test so we can discuss a suitable sample.

Discuss a Test Sample
Pre-Inquiry Questions

Frequently Asked Procurement Questions

Clear answers on how specifications, MOQs, lead times, and export packing are evaluated for bulk orders.

1. What information do you need for a quote? +
To prepare an accurate bulk quotation, please share your application (e.g., sign printing, packaging, protection, or distribution), estimated quantity, and destination country/port. If you already know your target thickness (mm), sheet weight (g/m²), size, and color, include them; if not, describe how the sheet will be used and we will propose a suitable specification first.
2. Can you recommend a thickness and sheet weight? +
Yes. Because thickness (mm) and sheet weight (g/m²) jointly determine bending stiffness and unit cost, we regularly help buyers pair them based on their exact scenario--such as H-stake sign rigidity, box stacking load, or floor impact protection. Choose "I need a recommendation" in the form below to start.
3. Can I test the sheets with my printing or converting process? +
Yes. If you need to verify UV/screen ink adhesion, flatness, die-cutting, or creasing performance, let us know your testing criteria. Depending on whether you need a standard stock swatch for material inspection or a custom-extruded trial sheet, we will discuss the appropriate sample format and terms [TO BE CONFIRMED].
4. What is the minimum order quantity (MOQ)? +
MOQ depends on the specific extrusion setup required--such as whether the order uses standard white/black/blue resin or a custom color masterbatch, custom sheet width, or special additives (UV, ESD, flame retardant) [TO BE CONFIRMED]. Share your target volume and we will confirm feasibility or suggest practical ways to meet the extrusion run requirement.
5. Can different specifications be included in one order? +
Yes, mixing different thicknesses, weights, or sheet sizes within a single container load or bulk order is common for distributors and converters, provided each individual specification meets the minimum extrusion run threshold [TO BE CONFIRMED].
6. What affects production lead time? +
Production scheduling depends on total order volume, number of specification changeovers, secondary converting steps (such as die-cutting, printing, or assembling), and current line schedule [TO BE CONFIRMED]. We confirm the estimated production completion window alongside your formal quotation.
7. How are the sheets packed for export? +
Sheets can be packed in PE film bundles or stacked on export pallets with corner guards and strapping. We arrange the packing method around your sheet dimensions, edge protection needs, container space utilization, and whether you unload by forklift or hand at your facility.
8. Are test reports available for my required specification? +
Available test documentation depends on the specific material formulation and functional grade requested [TO BE CONFIRMED]. Any test report we provide states the exact material, specification, test items, and date tested--please let us know your compliance or testing requirements upfront so we can verify availability for your specification.
Direct Factory Inquiry

Tell Us What You Need

Share your application and order details. We'll review your requirements and follow up on the specification and quotation.

How would you like to start? *

Target Sheet Specifications

Leave any field as "Not sure" if you want us to advise.

What happens next: We'll review your requirements, clarify any missing details, and prepare a quotation based on the confirmed specification.

Direct Factory Contact: sales@coropak.com | WhatsApp: +86 186 6221 7067
PP Corrugated Sheets Custom Bulk Specification & Quote
Get a Bulk Quote